AquaSense Installation Guide

Most customers install AquaSense themselves in under an hour. Follow this guide for a smooth setup.

Before You Start

What you'll need:

• Screwdriver
• Wire stripper (optional)
• Ladder (for tank access)
• Smartphone with Nivoryx app

Step 1: Mount the Sensor

1. Open tank lid
2. Clean mounting area
3. Attach sensor holder with clips
4. Ensure sensor points straight down
5. Route cable out of tank

Step 2: Install Controller

1. Mount near pump starter
2. Connect power (USB-C)
3. Connect relay wires to pump

Step 3: Configure App

1. Download Nivoryx app
2. Create account
3. Add device via Bluetooth
4. Calibrate sensor

Watch Video Guide →