Deployment Use Cases

Basic water management for a typical household with one overhead tank and one pump.

• Real-time tank monitoring
• Auto-fill when low
• Mobile app control
• Works offline via BLE

MCD and municipal areas where water arrives in daily windows — not at a fixed time. Window scheduling, dry-run detection, and smart retries until the tank fills.

• Up to two daily supply windows
• Dry-run detection and smart retries
• Offline-first with BLE clock sync
• Pairs with emergency borewell backup

When municipal supply fails for days, automatically run the submersible to a safe fill level — with cooldowns that protect your borewell pump.

• Automatic backup at critical tank level
• 50% fill cap and cooldown between cycles
• Composes scheduled municipal supply
• Manual override from HomeSense dashboard

Multiple tanks with a shared pump. Ideal for large villas or homes with separate overhead and ground-level tanks.

• Monitor up to 5 tanks
• Priority-based filling
• Shared pump management
• Zigbee mesh networking

Large-scale residential deployment with centralized monitoring and fair water distribution across all units.

• 20+ tank monitoring
• Fair water distribution
• Centralized dashboard
• Zigbee mesh with routers

Water treatment plants, factories, and large commercial facilities requiring multi-gateway fleet management.

• Multi-gateway architecture
• Up to 8 independent Zigbee networks
• Fleet management
• Cloud analytics via MQTT

The simplest possible setup. Control a single device directly from your phone over BLE -- no gateway needed.

• BLE direct control from phone
• No gateway required
• Lowest cost entry
• Ideal for single tank

Fully automated, fully offline filling for one tank. Set thresholds and let the system handle the rest.

• Fully offline operation (no cloud)
• Threshold-based auto-fill
• Motor safety (max runtime 120 min cooldown)
• Fault detection and recovery

Shared pump fills multiple tanks using priority-based scheduling. Handles round-robin or simultaneous fill strategies.

• Priority-based round-robin or simultaneous fill
• Shared motor pump management
• Tank switch in ~35 seconds
• Motor max runtime 4 hours continuous

Dedicated pump and motor monitoring with overcurrent, thermal, and dry-run protection.

• 6 motor types supported (single-phase, three-phase, DC, submersible, jet, centrifugal)
• Overcurrent, thermal, and dry-run protection
• <10ms relay switching, <100ms protection response
• Energy tracking and daily statistics